How to Design the Best Wheelchair Ramp

The formulation of the best wheelchair ramp is somewhat constrained by safety, accessibility, and usability matters. The following features should be considered: including the slope at which the ramp has to be built, the width of the ramp or the kind of surface to be covered, and the size of the landing stage. 

An optimal slope ensures ease of use; adequate width should not be less than 36 inches so that a wheelchair of any size can be migrated with ease. Universal design and the ADA standards should be followed to keep the structure always safe for use. 

Below we discuss how to design the best handicap wheelchair ramp; kindly reach out for more information on the same. 

Compliance with Standards and Regulations 

Due to security constrains there are set standards prepared by the regulation authorities as indicated by the ADA. According to ADA guidelines, ramps should have a minimum width of 36 inches and a maximum slope of 1:12: That should imply that for every unit of height there has to be provision of 1/12 of the total of the access ramp lengths.    

This means is easily possible to climb up and along such a thing while maintaining the principle of having outrageously steep gradients which it obscures. The regulations also provide guidelines that if the height of the ramp is any more than 6 inch, then handrails on both sides of the ramp need to be installed.

Adequate Landing Areas 

The wheelchair ramp can be located at the lowest point of the construction at any instance that the length of construction warrants the placing of another floor. ADA requirements state that if an extension or a landing is to be provided, it should have a width of every landing being required to be specified in terms of the width of ramps and all extensions is required to measure not less than sixty inches in length.    

This makes it statistically safe to use a wheelchair in case the user feels exhausted at any moment. There should not be any obstruction on any of the landing and the other space that ought to be cleared for motorized or large wheel wheelchairs.    

Environmental Considerations 

The best ramp should be developed in order to either get an access to the construction or to several of its parts if pertained to the specific facility. It should not be near areas with the potential of collecting water or any other object that may hinder movement. 

Also, the wall should be painted and installed with light to ensure there is adequate lighting through the night or in the evening. 

Conclusion 

It is important that several contractual factors like following the rules and regulations governing the construction of the ramp, or the ease with which the user of the ramp maneuvers up be considered when designing one. 

The above article has discussed how to design the best ramp, and you can reach out for more information on the same.